Walletinvestor digi plus

List of contents of this article:

• 1, How to put the gho file into the USB disk as a system disk
• 2, How to set the IDE mode in the XP system?
• 3、How to reinstall the system with a USB disk win7

How to put the gho file on the USB diskSystem disk

1. Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download the installer's USB disk startup PE production tool on the Internet, and insert the USB disk into the computer to run this software to make a boot USB disk.

2. Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer to run this software to make a startup USB flash drive.

3. If you made a backup when the system was installed in the past, you can use the backup to restore the system. If you don't make a backup, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.

How to set the IDE mode in the XP system?

win7 is installed on the C disk (AHCI hard disk mode in BIOS), XP is installed on the D disk (IDE hard disk mode in BIOS, remember to change to IDE mode when the installation of XP fails or the hard disk cannot be found).

Find the "sata controller mode" option under "configuration" and select "compatible" mode, which is compatible with "IDE" mode. If you select "ahci", it is "sata" mode. , select it as "compatible mode" here. Then press the F10 key, and finally press the Enter key to exit.

Enter the BIOS setting interface and find the "SATA Mode" option. Set it to "IDE" mode, save the settings and restart the computer. This is because the XP system does not support AHCI mode, so it needs to switch the hard disk mode to IDE mode.

Enter bios to modify the hard disk option Advanced→sata option under bios, change AHCI to IDE and press F10 to save and exit.

Press the F2 key to enter the BIOS settings to change the AHCI Mode Control option under the Advanced menu to IDE compatible mode XP system. If you install Windows7, turn on AHC.I mode 2 Use third-party USB disk production software to make a USB disk boot disk, download the genuine system image or pure version image, and download the image with the suffix ISO.

If you must change the system from AHCI mode to IDE mode, you can follow these steps: turn on the computer and enter the BIOS settings. The method depends on the manufacturer and model of your computer. Usually, you can press the FF10 or Delete key to enter the BIOS settings. Find relevant options such as "Storage Device" or "SATA Configuration".

How to reinstall the system win7 with a USB flash drive

1. Make a boot U disk and go to the physical store to buy a 4-8G USB disk (you can ask the boss to help make it intoThe following steps can be omitted by unifying the USB flash drive), search and download old hairy peach or cabbage and other startup USB disk production tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.

2. Press and hold the Esc key to select a USB flash drive name to reinstall the system. Press and hold ESC when shutting down, press the power button, and select enter setup after seeing the picture in the picture. After entering the BIOS, press the arrow key to select the security option, and then select the boot menu here.

3. This article will introduce the installation method of USB disk and win7 system disk to help users quickly complete the system installation. Install the USB disk and download a USB disk making tool (Chinese cabbage, old hairy peach, Chinese cabbage) and so on. Make the USB disk, test the thing first, and then put the win 7 GHO system file into the USB disk.

4. You can choose to install the USB disk or the system disk to install the windows7 system. To install the USB disk, first download a USB disk production tool (Cabbage, Old Maotao, Chenfeng) and so on. Run the program to make the USB disk. If there is data on the USB disk, it will be checked first. After completion, put the win 7 GHO system file into the USB disk.

5. Enter PE. When we enter the USB disk PE system, we can see the "Diskgenius" partition tool on the system desktop. We double-click this icon to enter. Open the partition tool. After entering the partition tool, we can see the interface of the tool, and then we can start partitioning the hard disk.