DigiPlus Philippine

List of contents of this article:

• 1, How to start a car
• 2、 How to start the car?
• 3, How to start the car
• 4, What are the steps to start the car?

How to start the car

1. Automatic gear cars: Automatic gear cars need to look around the vehicle, open the door after confirming safety, and make sure that the gear isBefore parking, step on the brake, and then press the button to start the button. The vehicle idles for about 30 seconds. Check whether the indicator light on the dashboard is abnormal, check if there is any abnormality, hang the D gear, and get ready to drive.

2. If it is a manual transmission, you need to step on the clutch and then start the engine, and then put it in 1st gear. While slowly releasing the clutch, the right foot should be transferred from the brake pedal to the accelerator pedal, and refuel slightly. The throttle and clutch are used together, and the vehicle moves forward slowly.

3. The specific operation steps for starting a car are as follows: Required tools: a car with good performance. Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts. Step on the car clutch pedal. Put the car on the first gear.

How to start the car?

Automatic transmission: Before starting, you need to look around the vehicle to ensure safety, open the door and put the gear in the parking gear before starting. After stepping on the brake, press the button to start the vehicle. The vehicle will idle for 30 seconds and check whether all the indicator lights are normal. If all indicators are normal, put them in D gear to get ready to start.

How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.

The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear.Release the foot brake, turn the ignition key to the ignition gear, and start the engine. Step on the foot brake, release the handbrake, and pull the gear from N to D.

After starting, the gear is put in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on the clutch and start the engine, then hang it into 1st gear, slowly release the clutch, move the right foot from the brake pedal to the accelerator pedal, and refuel slightly.

The specific operation steps for starting the car are as follows: before starting the car, it should be in a void, and shake it left and right to ensure that it is in the position of the idle gear. When starting, step on the clutch with your left foot and step on the foot brake with your right foot. Turn the ignition switch to the right with your right hand. After the circuit is turned on, the light on the dashboard will turn on.

Now most of them adopt three startup methods.: x0dx0a one-button semi-automatic ignition, when the driver enters the driver's seat, adjust the seat position, press the ignition key, and the vehicle starts.

How to start the car

1. Check the surroundings of the vehicle before getting in the car, make sure that there are no small animals, children next to you, or whether There are iron nails, glass and other items that hinder the safety of cars.The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.

2. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.

3. How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.

What are the steps to start the car?

1. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.

2. Steps to start the car correctly: After getting on the car, adjust the seat to suit your position, and then fasten the seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.

3. After starting, put the gear in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on the clutch and start the engine, then hang it into 1st gear, slowly release the clutch, move the right foot from the brake pedal to the accelerator pedal, and refuel slightly.The throttle and clutch are used together, and the vehicle moves forward slowly.

4. Observe the surrounding environment of the car. Before driving, go around the car to see if there are any obstacles around the car, whether there are pedestrians on the driving track, and whether the road ahead is clear.

5. The gear should be placed in the P or N position (if it is in another position, the automatic gear car cannot be ignited). Dial the key to the ON position first and stay for about 10 seconds (circuit self-checking process, check whether the indicator lights on the dashboard are displayed normally). If the self-check is normal, it can be ignited and started.